|Year : 2014 | Volume
| Issue : 7 | Page : 768-772
Nanostructure-based platforms-current prospective in ophthalmic drug delivery
Rakesh Kumar Sharma, Alaa Eldeen B Yassin
Department of Pharmaceutics, College of Pharmacy, King Saud Bin Abdulaziz University for Health Sciences, Riyadh, Kingdom of Saudi Arabia
|Date of Submission||14-Nov-2013|
|Date of Acceptance||03-Apr-2014|
|Date of Web Publication||13-Aug-2014|
Rakesh Kumar Sharma
Department of Pharmaceutics, College of Pharmacy, King Saud Bin Abdulaziz University for Health Sciences, Riyadh
Kingdom of Saudi Arabia
Source of Support: This editorial presents the recent work on ophthalmic drug delivery with emphasis given on the field of Nanotechnology. No funds have been received in order to carry out or culminate this work., Conflict of Interest: None
The topically applied drugs as drops are washed off from the eye in very short period, resulting in low ocular bioavailability of drugs. Number of approaches have been attempted to increase the bioavailability and the duration of action of ocular drugs. This review provides an insight into various novel approaches; hydrophilic nanogels, solid lipid nanoparticles, and nanosponges applied very recently in the delivery of insoluble drugs, prolonging the ocular residence time, minimize pre-corneal drug loss and, therefore, bioavailability and therapeutic efficacy of the drugs. Despite various scientific approaches, efficient ocular drug delivery remains a challenge for pharmaceutical scientists.
Keywords: Hydrophillic nanogels, ophthalmic drug delivery, nanosponges, solid lipid nanoparticles
|How to cite this article:|
Sharma RK, Yassin AB. Nanostructure-based platforms-current prospective in ophthalmic drug delivery. Indian J Ophthalmol 2014;62:768-72
|How to cite this URL:|
Sharma RK, Yassin AB. Nanostructure-based platforms-current prospective in ophthalmic drug delivery. Indian J Ophthalmol [serial online] 2014 [cited 2020 Apr 9];62:768-72. Available from: http://www.ijo.in/text.asp?2014/62/7/768/138301
The major diseases affecting the eye are macular degeneration, diabetic macular edema, cataract, proliferative vitreoretinopathy, uveitis, cytomegalovirus, and glaucoma. , More than 90% of the marketed ophthalmic formulations are as eye drops. These topically applied drugs as drops are washed off from the eye by different mechanisms (lacrimation, tear dilution, and tear turnover), resulting in low ophthalmic bioavailability of drugs.  Moreover, human cornea has epithelium, substantia propria and endothelium also restricts the ocular entry of drug molecules; as a result of these factors, less than 5% of administered drug enters the eye.  Major barriers to topical Ocular Drug Delivery are the high tear flow, rate of 16 ml per minute during waking hours (basal 0.5-2.2 ml/min) up to 300 ml/min in reflex stimulation of lacrimation.  The mucin present in the tear film has a protective role by forming a hydrophilic gel layer acts as a barrier to drug delivery systems. 
Number of approaches have been attempted to overcome these physiological barriers to increase the bioavailability and subsequently the therapeutic action of ocular medications.
These are broadly divided into two categories. The first approach is on use of the drug delivery systems that provide controlled and continuous delivery of medication. The second maximize corneal drug absorption and minimizing pre-corneal drug loss. The typical pulse entry type drug release behavior observed with ocular aqueous solutions (eye drops), suspensions, and ointments can be replaced by a more controlled, sustained, and continuous drug delivery, using a controlled release ocular drug delivery system.
These systems can achieve therapeutic action with a smaller dose and a fewer systemic and ocular side effects. Such systems include implantable systems, ocuserts, collagen shields etc., but the limitations of these systems include poor patient compliance due to high cost of the systems, inability of self-insertion, and need surgery. ,, Other approaches include increased viscosity of vehicle, which is based on the fact that the bioavailability of the applied drug can be enhanced by increasing the contact time between the drug and the ocular surface. Studies to-date indicate that this approach has only limited value, as the formulations are liquid and, therefore, subject to elimination from the eye by all the factors discussed earlier. 
The in situ gelling systems or phase transition systems were widely used to improve the ocular bioavailability of drugs, which are instilled in a liquid form and shift to a gel or solid phase in the cul-de-sac. ,, The phase transition is triggered by the pH of the tears, the temperature at the eye surface, or the electrolytes present in the tear film. , Recently, there is a growing interest in the development of a novel sustained nanostructured ophthalmic drug delivery system. This article provides very recent developments in the area of drug delivery to the eyes.
Hydrophilic Nanogels : Hydrogels can be defined as the polymeric networks with three-dimensional configuration capable of absorbing high amounts of water or biological fluids. The ability of hydrogels to absorb water is due to the presence of hydrophilic groups in polymers forming hydrogel structures.  Hydrogels were used for ophthalmic drug delivery in late 80's and in 90's with primary objective is to increase the residence time for better absorption. ,
These can be classified according to: 
- The nature of side groups (neutral or ionic)
- Mechanical and structural features (affine or phantom)
- Method of preparation (homo- or co-polymer)
- Physical structure (amorphous, semi crystalline, hydrogen bonded, supermolecular, and hydrocollodial)
- Physiologic responsiveness to environment stimuli (pH, ionic strength, temperature, electromagnetic radiation, etc.).
Even hydrogels have high water-absorbing ability; show a swelling behavior even instead of being dissolved in the aqueous surrounding environment. It is due to the critical crosslinks present in the hydrogel structure. Different Polymer(s) hydrated to different degrees (around 90% wt.), depending on the nature of the aqueous environment and polymer composition.
The natural, synthetic, and semi-synthetic polymers used in hydrogel preparations are classified as: ,
- Natural polymers and their derivatives
- Anionic: Alginic acid, pectin, carrageenan sulfate, dextran sulfate
- Cationic: Chitosan, polylysine
- Neutral: Dextran aragose
- Amphipathic polymers: Collagen, carboxymethyl chitin, fibrin.
- Synthetic polymers: PEG-PLA-PEG, PEG-PLGA-PEG, PEG-PCL-PEG, PLA-PEG-PLA, PEG6CDs, PEGMMA
- Semi-synthetic polymers: P (PEG- co-peptides), alginate-g-(PEO-PPO-PEO), P (PLGA-co-serine), collagen acrylate, P (HPMA-g-peptide), P (HEMA/Matrigel)*.
* Abbreviations: PEG-Polyethylene glycol, PLA-Polylactic acid, PLGA- Polylactic-co-glycolic acid, PCL- Polycaprolactone, CDs- cyclodextrins, PEO-Polyethylene oxide, PPO-Polypropylene oxide, PHPMA- Polyhydroxypropylmethacrylamide, PHEMA-Polyhydroxyethylmethacrylamide, PEGMMA-Polyethylene glycol monoethyl ether monomethacrylate.
Yin HB et al. successfully synthesized a biodegradable triblock copolymer poly (ethylene glycol)-poly (e-caprolactone)-poly-(ethylene glycol) (PEG-PCL-PEG, PECE), which was flowing sol at low temperature and turned to non-flowing gel at body temperature.  The toxicity evaluation of PECE hydrogel as an in-situ sustained drug delivery for eyes was performed, including the biodegradability of PCTE hydrogel in the eye, its effect on in vitro cultured human lens, intraocular pressure, and ocular tissues.  The results showed that the prepared PECE hydrogel was biocompatible and biodegradable and safe candidate for sustained ophthalmic drug delivery. Tayel S. A et al. prepared controlled-release in situ ocular drug-loaded nanoemulsion (NE) gels of Terbinafine hydrochloride using oils (isopropyl myristate/Miglyol® 812), surfactants (Tween® 80/Cremophor® EL), a co-surfactant (polyethylene glycol 400), and water. Drug pharmacokinetics of sterilized Formulation of Miglyol® 812, Cremophor® EL: Polyethylene glycol 400 (1:2) and water (5, 55 and 40%, w/w, respectively). In-situ NE gel and oily drug solution were evaluated in rabbit aqueous humor. The gels were transparent, pseudoplastic, mucoadhesive, and showed more retarded zero-order drug release rates with least ocular irritation potential, prolonged mean residence time, and increased bioavailability.  In vivo studies in rabbit eye showed a marked improvement in anti-inflammatory activity for Hydroxypropyl-β-cyclodextrin (HP-β-CD) based for pH-induced mucoadhesive hydrogel to treat uveitis. 
Ortega M D et al. designed and tested in-vivo the sustained release aqueous eye drops of dexamethasone, based on cyclodextrin (CD) nanogels. The nanogel eye drops (containing 25 mg dexamethasone per ml) were tested in rabbits and compared to the commercially available product Maxidex® (suspension with 1 mg dexamethasone per ml). One drop administration of the nanogel eye drops resulted in nearly constant dexamethasone concentration for at least 6 h in the tear fluid, whereas the concentration after administration of Maxidex® fell rapidly within 1 to 3 hrs. The dexamethasone nanogel eye drops were well tolerated with no macroscopic signs of irritation, redness, or other toxic effects. 
Solid lipid nanoparticles: The promising approach nowadays is the use of colloidal carrier systems characterized by a submicron-meter size. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) represent alternatives to conventional ocular systems. Solid lipid nanoparticles are prepared with solid lipids. The majority of lipids used in the preparation are hydrogenated fatty acids like hydrogenated cottonseed oil (Lubritab™ or Sterotex™), hydrogenated palm oil (Dynasan™ P60 or Softisan™ 154), hydrogenated castor oil (Cutina™ HR), and hydrogenated soybean oil (Sterotex™ HM, or Lipo™). 
Number of publications describes the methods for preparation of SLN by micro emulsion, ultrasonication or high-speed homogenization, high pressure homogenization, solvent emulsification/evaporation, double emulsion method, and supercritical fluid technology. 
Li R et al. prepared and investigated methazolamide-loaded solid lipid nanoparticles (SLNs) for ocular delivery by emulsion-solvent evaporation method. Percentage decrease in intraocular pressure and ocular irritation was measured. Results indicated that methazolamide-SLNs had higher therapeutic efficacy, maximum action, more prolonged effect, and less ocular irritation than drug solution and commercial product.  Abul Kalam M et al. carried the investigations on gatifloxacin bioavailability to the eye using solid-lipid nanoparticles (SLN). SLNs were prepared by o/w-microemulsion method. C max of gatifloxacin from SLNs showed 1.09-fold higher concentration as compared to conventional Eye-drops. The aqueous humor levels of gatifloxacin drug after single topical instillation asGate (®] Eye drops and positively charged SLN were measured. A 3.37-fold increase in the bioavailability was observed with the SLN containing formulation. This results that SLNs could enhance ocular bioavailability of gatifloxacin and increase its residence time in the eyes. Moreover, there were no signs of ocular irritation with the SLN formulations, indicating their relative safety compared to the marketed drops. , Seyfoddin A and Al-Kassas R investigated the ocular bioavailability of acyclovir solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs). NLCs formulation showed faster permeation through the excised cornea followed by SLNs, indicating their potential enhanced corneal penetration properties.  Hippalgaonkar K et al. prepared the indomethacin-loaded solidlipidnanop articles of drug content 0.1% w/v for ocular delivery. Compritol (®] 888 ATO was selected as the lipid phase for the indomethacin-SLNs as indomethacin exhibited a highest distribution coefficient and solubility in this phase. A dramatic increase in the chemical stability and in vitro corneal permeability of indomethacin was observed with the indomethacin-SLN formulation in comparison to the indomethacin solution of identical strength. 
Nanosponges: Nanosponges are encapsulating type of nanoparticles, which encapsulates the drug molecules within its core. By the method of associating with drugs, the nanoparticles can be classified into encapsulating nanoparticles, complexing nanoparticles, and conjugating nanoparticles. Nanosponges are tiny mesh-like structures, capable of carrying both lipophilic and hydrophilic substances. , The nanosponge is made up of a 'backbone' (a scaffold structure) of naturally degradable polyester. The polyester strands are mixed in solution with small molecules called cross-linkers that have an affinity for certain portions of the polyester. They 'cross link' segments of the polyester to form a spherical shape that has many pockets (or cavities) where drugs can be stored. The commonly used polymers in the preparation include cyclodextrins and its derivatives and cross linkers include ethyl cellulose and polyvinyl alcohol. Diphenyl carbonate, diaryl carbonates, diisocyanates, pyromellitic anhydride, glutaraldehyde. ,
Nanosponges are prepared by:
- Solvent method in which the polymer is mixed with a suitable polar aprotic solvent such DMSO and dimethylformamide. Then, this mixture is added to excess quantity of the cross-linker, preferably in cross-linker/polymer molar ratio of 5 to 15. Carry out the reaction at temperature ranging from 10°C to the reflux temperature of the solvent, for time ranging from 1 to 48 h. After completion of the reaction, allow the solution to cool and recover the product by filtration under vacuum ,
- Ultra-sound-assisted: In this method, the polymer and the cross-linker are mixed in a particular molar ratio in a flask. Then, it is placed in an ultrasound bath filled with water and heats it to 90°C. The mixture is sonicated for 5 hours. Then, allow the mixture to cool and break the product roughly. Wash the product with water to remove the unreacted polymer and subsequently purify. 
The major application of nanosponges is in the solubility enhancement. Cyclodextrin-based nanosponges improve the wetting and solubility of molecules with very poor solubility in water. The drugs are molecularly dispersed within the nanosponge structure, released as molecules, practically eliminating the dissolution step. Recently, Swaminathan S et al. investigated dexamethasone, a poorly soluble drug; nanosponges prepared by crosslinking of beta cyclodextrins with diphenyl carbonate for ocular delivery. The nanosponges of dexamethasone with beta-cyclodextrin were prepared with different cross-linking ratio 1:2, 1:4, and 1:8 for ocular applications. Encapsulation of the drug in cyclodextrins was done by incubation-lyophilization technique. Dexamethasone was loaded in the highest amount in formulation 1:4, as much as 10% w/w. In vitro release studies showed that release of the drug was found in controlled manner for five hours. 
Ophthalmic products toxicity evaluation
The in-vivo study on ophthalmic products is done on experimental animals, usually on rabbit's eye. ,,, Preparation volume 50 μl is instilled topically in the center of the lower cul-de-sac. Tear film and aqueous humor samples are collected and analyzed. Eyes of the animal are observed for signs of irritation and injury. In vitro methods were developed with human corneal endothelial cells. Diclofenac sodium solid lipid nanoparticles (SLNs), prepared with goat fat and phospholipids evaluated using bio-engineered human cornea, produced from immortalized human corneal endothelial cells (HENC), stromal fibroblasts, and epithelial cells. Sustained release and high permeation of diclofenac sodium through the bio-engineered cornea were achieved.  The Bovine Corneal Opacity and Permeability (BCOP) assay has been accepted as a valid in-vitro alternative method to the Draize eye irritation test with the development of an improved laser light-based opacitometer (LLBO) for the analysis of the complete corneal surface instead of dual beam OP-KIT opacitometer. 
Confocal laser scanning microscopy study on the transport mechanism through the corneal epithelium of nanostructured lipid carrier was carried out in rabbits in vivo. The corneas were isolated and rinsed in physiological saline to remove the adhesive fluorescence fragment. After 30 minute administration in to eyes, the interaction with corneal epithelia to be investigated by observing the corneal samples using confocal laser scanning microscopy (CLSM). 
The EpiOcular tissue model is a new in-vitro test method for ocular irritation, produced by MatTek Corporation tissue production facilities. The EpiOcular tissue model shows in-vivo like morphological and growth characteristics that are uniform and highly reproducible. The tissue consists of highly organized basal cells, which progressively flatten out as the apical surface of the tissue similar to the normal in-vivo corneal epithelium. The endpoint used is the determination of extent of cytotoxicity.  The validation of EpiOcular eye irritation test was performed with 60 chemicals.  This test could be applied as an alternate to rabbit eye test in the toxicological assessment of ophthalmic preparations.
| Conclusion|| |
Most of the formulation efforts aim at maximizing ocular drug absorption through prolongation of the drug residence time in the eye as well as to slow drug release from the delivery system and minimize pre-corneal drug loss. Nanostructured platforms provide the effective ways for delivery of insoluble drugs to the target site. As these platforms for ophthalmic delivery are very recent and the research continues, formulation factors such as loading of drug, release rate, stability, and therapeutic effectiveness for these needs to be optimized.
| Acknowledgement|| |
The author would like to acknowledge the library facilities provided by King Saud Bin Abdulaziz University for health sciences, Riyadh, Kingdom of Saudi Arabia, for collection of literature.
| References|| |
Eljarrat-Binstock E, Pe'er J, Domb AJ. New techniques for drug delivery to the posterior eye segment. Pharm Res 2010;27:530-43.
Dayle H, Geroski, Edelhauser HF. Drug delivery for posterior segment eye disease. Invest Ophthamol Vis Sci 2000;4:961-4.
Paulsen F. Anatomy and physiology of efferent tear ducts. Ophthalmologe 2008;105:339-45.
Ludwig A. The use of mucoadhesive polymers in ocular drug delivery. Adv Drug Deliv Rev 2005;57:1595-639.
Lang JC. Ocular drug delivery: Conventional ocular formulations. Adv Drug Deliv Rev 1995;16:39-43.
Mannermaa E, Vellonen KS, Urtti A. Drug transport in corneal epithelium and blood-retina barrier: Emerging role of transporters in ocular pharmacokinetics. Adv Drug Deliv Rev 2006;58:1136-63.
Kunou N, Ogura Y, Yasukawa T, Kimura H, Miyamoto H, Honda Y, et al
. Long-term sustained release of ganciclovir from biodegradable scleral implant for the treatment of cytomegalovirus retinitis. J Control Release 2000;68:263-71.
Saettone MF, Perini G, Carafa M, Santucci E, Alhaique F. Non-ionic surfactant vesicles as ophthalmic carriers for cyclopentolate. A preliminary evaluation. Sciences et techniques pharmaceutiques, Pharma Sciences 1996;6:94-8.
Eshar D, Wyre NR, Schoster JV. Use of collagen shields for treatment of chronic bilateral corneal ulcers in a pet rabbit. J Small Anim Pract 2011;52:380-3.
Grass JM, Robinson JR. Relationship of chemical structure to corneal penetration and influence of low viscosity solution on ocular bioavailability. J Pharm Sci 1984;73:1021-7.
Ibrahim H, Bindschaedler C, Doelker E, Buri P, Gurny R. Concept and development of ophthalmic pseudo-lattices triggered by pH. Int J Pharm 1991;77:211-9.
Miller SC, Donovan MD. Effect of poloxamer 407 gel on the miotic activity of pilocarpine nitrate in rabbits. Int J Pharm 1982;12:147-52.
Qi H, Chen W, Huang C, Li L, Chen C, Li W, et al
. Development of a poloxamer analogs/carbopol-based in situ
gelling and mucoadhesive ophthalmic delivery system for puerarin. Int J Pharm 2007;337:178-87.
Yin H, Gong CY, Shi S, Liu X, Wei Y, Qian Z. Toxicity Evaluation of Biodegradable and Thermosensitive PEG-PCL-PEG Hydrogel as a Potential in situ
sustained ophthalmic drug delivery system. J Biomed Mater Res B Appl Biomater 2010;92:129-37.
El-Kamel AH. In vitro
and in vivo
evaluation of pluronic F 127-based ocular delivery system for timolol maleate. Int J Pharm 2002;241:47-55
Hamidi M, Azadi A, Rafiei P. Hydrogel nanoparticles in drug delivery. Adv Drug Deliv Rev 2008;60:1638-49.
Zatloukal Z, Sklubalová Z. Sterilized ophthalmic hydrogels with hydroxypropyl methyl cellulose: Determination and mathematical treatment of flow properties. Pharm Dev Technol 2007;12:55-60.
Burgalassi S, Chetoni P, Saettone MF. Hydrogels for ocular delivery of pilocarpine: Preliminary evaluation in rabbits of the influence of viscosity and of drug solubility. Eur J Pharm Biopharm 1996;42:385-92.
Bell CL, Peppas NA. Biomedical membranes from hydrogels and interpolymer complexes. Adv Polym Sci 1995;122:125-75.
Coviello T, Maricardi P, Marianecci C, Alhaique F. Polysaccharide hydrogels for modified release formulations. J Control Release 2007;119:5-24
Hoffman AS. Hydrogels for biomedical applications. Adv Drug Deliv Rev 2002;43:3-12.
Tayel SA, El-Narawi MA, Tadros MI, Abd-Elsalam WH. Promising ion-sensitive in situ
ocular nanoemulsion gels of terbinafine hydrochloride: Design, in vitro
characterization and in vivo
estimation of the ocular irritation and drug pharmacokinetics in the aqueous humor of rabbits. Int J Pharm 2013;443:293-305.
Kesavan K, Kant S, Singh PN, Pandit JK. Effect of hydroxypropyl-β-cyclodextrin on the ocular bioavailability of dexamethasone from a pH-induced mucoadhesive hydrogel. Curr Eye Res 2011;36:918-29.
Ortega MD, Lorenzo CA, Concheiro A, Loftsson T. Dexamethasone eye drops containing ÷-cyclodextrin-based nanogels. Int J Pharm 2013;441:507-15.
Yassin AE, Bekairy AA, Katheri AA, Sharma RK. Anticancer-loaded solid lipid Nanoparticles: High Potential Advancement in chemotherapy. Dig J Nanomater Biostruct 2013;8:905-16.
Li R, Jiang S, Liu D, Bi X, Wang F, Zhang Q, et al
. A potential new therapeutic system for glaucoma: Solid lipid nanoparticles containing methazolamide. J Microencapsul 2011;28:134-41.
Kalam AM, Sultana Y, Ali A, Aqil M, Mishra A, Aljuffali A, et al
. Part I: Development and optimization of solid-lipid nanoparticles using Box-Behnken statistical design for ocular delivery of gatifloxacin. J Biomed Mater Res A 2013;101:1813-27.
Kalam AM, Sultana Y, Ali A, Aqil M, Mishra A, Aljuffali A, et al
. Part II: Enhancement of transcorneal delivery of gatifloxacin by solid lipid nanoparticles in comparison to commercial aqueous eye drops. J Biomed Mater Res A 2013;101:1828-36.
Seyfoddin A, Al-Kassas R. Development of solid lipid nanoparticles and nanostructured lipid carriers for improving ocular delivery of acyclovir. Drug Dev Ind Pharm 2013;39:508-19.
Hippalgaonkar K, Adelli GR, Repka MA, Majumdar S. Indomethacin-Loaded Solid Lipid Nanoparticles for ocular delivery: Development, characterization, and In vitro
evaluation. J Ocul Pharmacol Ther 2013;29:216-28.
Trotta F, Cavalli R. Characterization and application of new hyper-cross-linked cyclodextrins, Compos. Interfaces 2009;16:39-48.
Cavalli R, Trotta F, Tumiatti W. Cyclodextrin-based nanosponges for drug delivery. J Incl Phenom Macrocycl Chem 2006;56:209-13.
Swaminathan S, Vavia PR, Trotta F, Torne S. Formulation of beta-cyclodextrin based nanosponges of itraconazole. J Incl Phenom Macrocycl Chem 2007;57:89-94.
Shende P, Deshmukh K, Trotta F, Caldera F. Novel cyclodextrin nanosponges for delivery of calcium in hyperphosphatemia. Int J Pharm 2013;456:95-100.
Renuka S, Kamla P. Polymeric Nanosponges as an alternative carrier for improved retention of econazole nitrate onto the skin through topical hydrogel formulation. Pharm Dev Technol 2011;16:367-76.
Jenny A, Merima P, Alberto F, Francesco T. Role of β- cyclodextrin nanosponges in polypropylene photooxidation. Carbohydr Polym 2011;86:127-35.
Lala R, Throat A, Gargote C. Current trends in β-cyclodextrin based drug delivery systems. Int J Res Ayur Pharm 2011;2:1520-6.
Swaminathan S, Vavia PR, Trotta F, Cavalli R. Nanosponges encapsulating dexamethasone for ocular delivery: Formulation design, Physicochemical characterization, safety and corneal permeability assessment. J Biomed Nanotechnol 2013;9:998-1007.
Aggarwal D, Pal D, Mitra AK, Kaur IP. Study of the extent of ocular absorption of acetazolamide from a developed niosomal formulation, by microdialysis sampling of aqueous humor. Int J Pharm 2007;338:21-6.
Ma WD, Xu H, Wang C, Nie SF, Pan WS. Pluronic F 127-g-poly (acrylic acid) copolymer as insitu gelling vehicle for ophthalmic drug delivery system. Int J Pharm 2008;350:247-56.
Shen J, Gan L, Zhu C, Zhang X, Dong Y. Noval NSAIDS Ophthalmic formulation: Flubiprofenaxetil emulsion with low irritancy and improved anti-inflammation effect. Int J Pharm 2011;412:115-22.
Attama AA, Reichl S, Muller-Goymann CC. Diclofenac sodium delivery to the eye: In vitro
evaluation of novel solid lipid nanoparticle formulation using human cornea construct. Int J Pharm 2008;355:307-13.
Verstraelen S, Jacob A, De Wever B, Vanparys P. Improvement of the Bovine corneal Opacity and Permeability (BCOP) assay as an in vitro
alternative to the Draize rabbit eye irritation test. Toxicol In Vitro
Tian BC, Zhang W J, Xu HM, Hao MX, Liu YB, Yang XG, et al
. Further investigation of nanostructured lipid carriers as an ocular delivery system: In vivo
transcorneal mechanism and in vivo
release study. Colloids Surf B Biointerfaces 2013;102:251-6.
Kaluzhny Y, Kandárová H, Hayden P, Kubilus J, d'Argembeau-Thornton L, Klausner M. Development of the EpiOcular TM
Eye Irritation Test for Hazard Identification and labeling of eye irritating chemicals in response to the requirments of the EU Cosmetics Directive and Reach legislation. Altern Lab Anim 2011;39:339-64.
Kolle SN, Kandarova H, Wareing B, Van Ravenzwaay B, Landsiedel R. In-house validation of the EpiOcular™ eye irritation test and its combination with the bovine corneal opacity and permeability test for the assessment of ocular irritation. Altern Lab Anim 2011;39:365-87.